Fresco Harmony Clear Coat Satin will cover approximately 150-200 sq ft of surface area depending.
Application: Fresco Harmony Clear Coat is applied using a putty knife. Hold the trowel at a 60 degree angle and scrape a very thin layer of the clear coat onto the dry Fresco Harmony finish. Scrape off any excess using a clean trowel and let this coat dry. This application will darken the color slightly and dry to a sheen. The clear coat can be slightly polished once it is dry by rubbing it with the flat side of a clean trowel.
55°F+ | DRY TIME: 1-2 HOURS
TEMPERATURE AND HUMIDITY DEPENDENT
HANDLING & STORAGE: When not in use, close container tightly and store at room temperature. Protect from freezing and extreme heat. If contents freeze, allow thawing at room temperature. Do not reuse container and dispose of unused or unwanted product in accordance with local laws regulating water base coatings.
|Dimensions||6.5 × 3.5 × 6.5 in|